|
|
Computer modeling of laser beam
Mittner, Ondřej ; Wilfert, Otakar (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis theoretically describes Gaussian beam, its characteristics and its passing through optical elements. The main attention is focused on creating of computer models of Gaussian beam in COMSOL Multiphysics application, detailed description of these models, presentation of achieved results and comparing these results with theoretic presumptions.
|
|
|
Design of motorized optical system used for focusing of a laser beam
Zobač, Evžen ; Novotný, Karel (referee) ; Novotný, Jan (advisor)
This diploma thesis deals with the structural and optomechanical design of automatization of focusing laser beam for a remote laser spectroscopy device. The chosen solution uses an active rangefinder and a rotary unit to control the change of the focus plane of the device's optic system. The dependence of the focus plane’s change on the shift of lens in the focus plane was practically measured. For proper control of the rotary unit, this dependency is needed. Structural parts were made based on the created drawing documentation. The structural parts were mounted in the existing assembly of the device together with the purchased components. The proposed solution enables a change of the optical system, for example, in order to obtain a more appropriate range of focal planes.
|
|
|
Position sensing detector
Ha, Tuan ; Wilfert, Otakar (referee) ; Barcík, Peter (advisor)
This thesis deals with design of a laser position detector. Different types of sensor are mentioned and compared at the beginning. Special attention is paid to quadrant sensor. Its pros and cons are discussed with designing methods. The sensor is simulated in Matlab to test its output response. Then the laboratory tests follow to meassure real response of the chip. Then follows the design of the detector based on measured and simulated data. In the conclusion of this thesis parameters of created device are evaluated.
|
|
|
Unstability cut of laser beam at dividing limiting gauge thickness
Kadlec, Zdeněk ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This thesis deals with the possibilities of cutting strong steel metal sheets by means of laser and problems rising from the incision, their technological investigation. The basic philosophy consists on the research of the interaction between laser bunch and material, depending on the position of focal poin and sequential results in spec. heat. It determines the main parametres of the incision (from the total quantities and matematical description) which have the biggest effect on the occurence of wide cut and perhaps even on the quality of products and consequential optimalization of these quantities.
|
|
|
Position sensing detector
Ha, Tuan ; Wilfert, Otakar (referee) ; Barcík, Peter (advisor)
This thesis deals with design of a laser position detector. Different types of sensor are mentioned and compared at the beginning. Special attention is paid to quadrant sensor. Its pros and cons are discussed with designing methods. The sensor is simulated in Matlab to test its output response. Then the laboratory tests follow to meassure real response of the chip. Then follows the design of the detector based on measured and simulated data. In the conclusion of this thesis parameters of created device are evaluated.
|
|
|
Design of motorized optical system used for focusing of a laser beam
Zobač, Evžen ; Novotný, Karel (referee) ; Novotný, Jan (advisor)
This diploma thesis deals with the structural and optomechanical design of automatization of focusing laser beam for a remote laser spectroscopy device. The chosen solution uses an active rangefinder and a rotary unit to control the change of the focus plane of the device's optic system. The dependence of the focus plane’s change on the shift of lens in the focus plane was practically measured. For proper control of the rotary unit, this dependency is needed. Structural parts were made based on the created drawing documentation. The structural parts were mounted in the existing assembly of the device together with the purchased components. The proposed solution enables a change of the optical system, for example, in order to obtain a more appropriate range of focal planes.
|
|
|
Unstability cut of laser beam at dividing limiting gauge thickness
Kadlec, Zdeněk ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This thesis deals with the possibilities of cutting strong steel metal sheets by means of laser and problems rising from the incision, their technological investigation. The basic philosophy consists on the research of the interaction between laser bunch and material, depending on the position of focal poin and sequential results in spec. heat. It determines the main parametres of the incision (from the total quantities and matematical description) which have the biggest effect on the occurence of wide cut and perhaps even on the quality of products and consequential optimalization of these quantities.
|
|
|
Computer modeling of laser beam
Mittner, Ondřej ; Wilfert, Otakar (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis theoretically describes Gaussian beam, its characteristics and its passing through optical elements. The main attention is focused on creating of computer models of Gaussian beam in COMSOL Multiphysics application, detailed description of these models, presentation of achieved results and comparing these results with theoretic presumptions.
|
guest ::
